Phase Behavior of a Designed Cyclopropyl Analogue of Monoolein: Implications for Low‐Temperature Membrane Protein Crystallization

Lipidic cubic phases (LCPs) are used in areas ranging from membrane biology to biodevices. Because some membrane proteins are notoriously unstable at room temperature, and available LCPs undergo transformation to lamellar phases at low temperatures, development of stable low‐temperature LCPs for biophysical studies of membrane proteins is called for. Monodihydrosterculin (MDS) is a designer lipid based on monoolein (MO) with a configurationally restricted cyclopropyl ring replacing the olefin. Small‐angle X‐ray scattering (SAXS) analyses revealed a phase diagram for MDS lacking the high‐temperature, highly curved reverse hexagonal phase typical for MO, and extending the cubic phase boundary to lower temperature, thereby establishing the relationship between lipid molecular structure and mesophase behavior. The use of MDS as a new material for LCP‐based membrane protein crystallization at low temperature was demonstrated by crystallizing bacteriorhodopsin at 20 °C as well as 4 °C.     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.     

Photovoltammetric behavior and photoelectrochemical determination of p-phenylenediamine on CdS quantum dots and graphene hybrid film

A photoelectroactive film composed of CdS quantum dots and graphene sheets (GS) was coated on F-doped SnO₂ (FTO) conducting glass for studying the electrochemical response of p-phenylenediamine (PPD) under photoirradiation. The result indicated that the cyclic voltammogram of PPD on CdS–GS hybrid film became sigmoidal in shape after exposed under visible light, due to the photoelectrocatalytic reaction. Such a photovoltammetric response was used to rapidly optimize the photoelectrocatalytic activity of hybrid films composed of different ratios of CdS to GS toward PPD. The influences of scan rate and pH on the photovoltammetric behavior of PPD on CdS–GS film revealed that although the controlled step for electrochemical process was not changed under photoirradiation, more electrons than protons might participate the photoelectrocatalytic process. Furthermore, the photoelectroactive CdS–GS hybrid film was explored for PPD determination based on the photocurrent response of film toward PPD. Under optimal conditions, the photocurrent signal on CdS–GS film was linearly proportional to the concentration of PPD ranging from 1.0 × 10⁻⁷ to 3.0 × 10⁻⁶ mol L⁻¹, with a detection limit (3S/N) of 4.3 × 10⁻⁸ mol L⁻¹. Our work based on CdS–GS hybrid film not only demonstrated a new facile photovoltammetric way to study the photoinduced electron transfer process of PPD, but also developed a sensitive photoelectrochemical strategy for PPD determination.     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

含羟基基团取代的氮氧自由基构筑的三个双核稀土化合物的结构及磁性表征

以三氟乙酰丙酮(tfac)为共配体的稀土配合物分别与5-溴-2-羟基苯取代的自由基配体和5-硝基-2-羟基苯取代的自由基配体进行反应,合成3个稀土-自由基配合物[Ln2(tfac)4(NIT-5Br-2PhO)2](Ln=Gd (1),Dy (2))和[Dy2(tfac)4(NIT-5NO2-2PhO)2](3)(NIT-5Br-2PhOH=2-(2′-hydroxy-5′-bromophenyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide,NIT-5NO2-2PhOH=2-(2′-hydroxy-5′-nitrophenyl)-4,4,5,5-tetra-methylimidazoline-1-oxyl-3-oxide)。单晶结构分析表明这3个化合物中的稀土离子均通过自由基配体上的羟基氧基团连接为双核的结构。配合物1的直流磁化率表征揭示了Gd(Ⅲ)离子间的反铁磁耦合对其磁行为起主要作用。     

Development of Pen-type Portable Electrochemical Sensor Based on Au-W Bimetallic Nanoparticles Decorated Graphene-chitosan Nanocomposite Film for the Detection of Nitrite in Water,Milk and Fruit Juices

The development and fabrication of a simple, portable, and sensitive detection tool to precisely monitor nitrite level is of growing importance in electrochemistry research, given the strong interest in the protection of drinking water quality, treatment of wastewater, food production, and control of remediation processes. This work describes the fabrication of a simple, cost-effective, pen-type electrochemical sensor based on bimetallic gold and tungsten nanoparticles electrochemically decorated on graphene-chitosan modified pencil graphite electrode (PGE) for the trace detection of nitrite in real samples. The prepared nanocomposite was characterized using XRD, SEM, and EDS. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS). Results revealed that the proposed sensor displayed excellent electrocatalytic activity towards electro-oxidation of nitrite with an irreversible redox reaction. The AuNPs-WNPs@Gr-Chi/PGE sensor exhibited excellent analytical performance with a wide linear range from 10 to 250 μM towards nitrite. The LOD and LOQ were calculated to be 0.12 μM and 0.44 μM, respectively. The designed electrochemical sensor was successfully applied for the detection of nitrite in water, milk, and natural fruit juice samples.     

Effects of Polydispersity on the Phase Behavior of Additive Hard Spheres in Solution

The ability to separate enzymes, nucleic acids, cells, and viruses is an important asset in life sciences. This can be realised by using their spontaneous asymmetric partitioning over two macromolecular aqueous phases in equilibrium with one another. Such phases can already form while mixing two different types of macromolecules in water. We investigate the effect of polydispersity of the macromolecules on the two-phase formation. We study theoretically the phase behavior of a model polydisperse system: an asymmetric binary mixture of hard spheres, of which the smaller component is monodisperse and the larger component is polydisperse. The interactions are modelled in terms of the second virial coefficient and are assumed to be additive hard sphere interactions. The polydisperse component is subdivided into sub-components and has an average size ten times the size of the monodisperse component. We calculate the theoretical liquid–liquid phase separation boundary (the binodal), the critical point, and the spinodal. We vary the distribution of the polydisperse component in terms of skewness, modality, polydispersity, and number of sub-components. We compare the phase behavior of the polydisperse mixtures with their concomittant monodisperse mixtures. We find that the largest species in the larger (polydisperse) component causes the largest shift in the position of the phase boundary, critical point, and spinodal compared to the binary monodisperse binary mixtures. The polydisperse component also shows fractionation. The smaller species of the polydisperse component favor the phase enriched in the smaller component. This phase also has a higher-volume fraction compared to the monodisperse mixture.     

AAO辅助三唑亚铁纳米材料:一维限制生长和二维表面成膜及自旋转换性能

通过连续多步自组装的方式分别将三唑亚铁（SCO1）和氨基三唑亚铁（SCO2）自旋转换纳米材料生长于氧化铝模板（AAO）的孔道内和表面上。利用扫描电镜（SEM）、红外光谱（IR）、粉末X射线衍射（PXRD）、拉曼光谱（Raman）等手段对SCO1-1D+2D和SCO2-1D+2D纳米材料进行表征,SEM表明随着自组装时间的增加,球状的SCO纳米颗粒生长于AAO孔道内,并逐渐形成1D的纳米结构,而在AAO表面则形成致密均匀的SCO-2D薄膜。两种SCO-1D+2D纳米粒子都具有两步自旋行为（SCO1-1D+2D：T_c1↑=319 K,T_c1↓=313 K,T_c2↑=381 K,T_c2↓=340 K;SCO2-1D+2D：T_c1↑=181 K,T_c1↓=155 K,T_c2↑=246 K,T_c2↓=233 K）。对相应的SCO-1D和SCO-2D磁性结果表明,两步自旋转换行为的产生是由于SCO组装体形貌的差异。其中,低温区的自旋转换行为是由生长于AAO表面的SCO-2D自旋转换性能所致,而发生在更高温度的第二阶段的自旋转换行为则归因于生长于AAO孔道内的SCO-1D的自旋转换性能。